3200W ultrasonic transducer dual vibrator for plastic welding

Ultrasonic transducer transfers the industrial electricity coming out from the ultrasonic generator into mechanical vibration via the inverse piezoelectric effect, the mechanical vibration is then boosted again by the welding horn, adding some pressure by the machine, the vibration will act on the working pieces of plastics.

During the use of the ultrasonic transducer, there are some problematic occasions that might appear, see the corresponding solutions as well as below:

1 If the ultrasonic transducer gets wet, check its connector first with the megameter, the insulation resistance value could basically judge the situation of the transducer. Insulation resistance is generally required to be more than 5 megohms, If this value is not reached, the transducer is generally in a damp situation. Put the whole transducer (except the plastic housing) into the oven and dry it for three hours at the temperature of 100 degrees centigrade or use a hairdryer to blow off the water until the impedance value reaches the normal status.

2. Ultrasonic transducer broken or burnt, under this situation, it is normally suggested to replace a new one or ask help from the professional ultrasonic supplier for repairment.

3.The transducer is degummed. Our transducer adopts the high-quality gel with our professional workers, so this rarely happens.

4.Stainless steel vibration surface perforation, which generally appears in a situation that a transducer has been used in full load for more than 10 years.

Technical parameters:

Features:

1. Low calorific value
2. Large output power
3. Small resonance impedance
4. Long working hours
5. High conversion efficiency

1. Do you have it in stock?

Yes, we have this kind of transducer in stock, it is regular size, for customized products, it will normally take longer time
2. What is your payment method?
T/T or Paypal with 100% prepayment. In some special cases, we accept L/C also.
3. Can we agent your transducers in our country or city?
Of course. We welcome customers all over the world for such cooperation.
4. What is your terms of delivery
EXW, FOB, CFR, CIF

5. What is your MOQ?

We do not limit the quantity, it is up to you.

Detailed Photos:

Incorporated in 2015, K& M Technologies Ltd is one-stop solution provider in plastic welding business, especially in ultrasonic plastic welding, ultrasonic non-woven fabric sealing and cutting, hot plate welding, water filter welding lines...

From June 2021, We started the cooperation with a famous brand Dongho Ultrasonics, and co-established a new company Sincere Sonics to handle the overseas market of Dongho brands ultrasonic welding machines.

We have the professional team for the design of the equipment based on over 25 years' experience of the main staff in this industry.

We have sold to more than 100 countries in the world in the past years, including coutries from Asia, Europe, South America, North America, Oceania and Africa.

Our product series include QD series, ME series, SS series and Dongho Series for ultrasonic welding machines; AY series for filter welding machines and hot plate welding machines.

Now we have agents in Turkey, India, Ukrane, Maylasia, Vietnam and we are looking for more agents or distributors around the world who can take good care of the aftersales services in the country or territory.